My Journey to the Beast: Pressing a 48kg Kettlebell

How do you go from pressing 28kg to 48kg? At under 80kg bodyweight? With a technique-solidifying, base-building, high-volume press plan followed by a strategic peaking effort. But to develop a successful strength program, you need to understand programming fundamentals and your individual training parameters. Here’s how Myren Fu, StrongFirst Certified Team Leader and StrongFirst Elite, got there.

“A press is not just a press,” said Tim Almond, StrongFirst Certified Senior Instructor and StrongFirst Elite, during my first SFG instructor certification almost four years ago. I was single-arm pressing 28kg and was fascinated by the heavier weights he and StrongFirst Certified Master Instructor Shaun Cairns casually put overhead. But I did not immediately get what he was trying to say. It took years to truly understand and appreciate what he meant.

Head coaching Myren designing a training plan

Since then, I’ve become obsessed with the science and art of programming for strength. I research, write countless programs, and conduct experiments on myself and willing students—that’s not as sinister as it sounds. Each time, I take the lessons learned and work them into the next plan, progressively learning along the way. But despite all this testing, one goal continued to vex me: figuring out how to emulate those crazy-strong SFG instructors who press “the beast”—a single 48kg kettlebell.

Understanding Individual Training Volumes

If there is one thing for you take away from this article, it is the importance of knowing your individual training parameters for both accumulation and intensification phases. Accumulation is all about getting the reps in—it’s a high volume phase where you accumulate many reps of lower intensity work. It’s important to build connective tissues, increase strength potential, and allows for more practice to happen sub-maximally. Intensification is about high intensity. In this article’s context, it’s a peaking strategy.

I thank many people for helping me advance my thinking here, most notably Dr. Mike Isratael and his crew, Dr. Chris Beardsley and his team, the late Charles Poliquin, and the many intelligent and selfless people at StrongFirst.

Before going boldly forth into the intensification process, doing a few accumulations phases helps to solidify technique and hypertrophy muscle groups, so you have greater strength potential for the task at hand: defeating the beast!

“To press a lot, you must press a lot.”

If you are new to kettlebell training, I suggest you pick up the book Enter the Kettlebell by StrongFirst CEO, Pavel Tsatsouline. The programming is rock solid—you can’t help but get stronger by incorporating his suggestions. One of his most valuable lessons is on how to wave the load to ramp-up volume without causing excessive peripheral fatigue—a common occurrence with traditional periodization.

Traditional loading looks like this:

5 sets of 6 reps
5 sets of 10 reps
5 sets of 15 reps

Wave loading looks like this:

5 sets of 1,2,3 reps
5 sets of 1,2,3,4 reps
5 sets of 1,2,3,4,5 reps

Although the total volume is the same, you can use a heavier kettlebell with the repetition ladder. Waving the training load ensures that high threshold muscle fibers are always activated without the build-up of metabolites. Hypertrophy without soreness lets you train more often with a high force output per session. Win, win.

Caution for Seasoned Lifters: Watch your Volume

If you have been training with kettlebells for years and are at an advanced level of strength and/or are near achieving your half-bodyweight press, you must factor in that with a higher training “age,” your maximum recoverable volume is typically lower than for beginner or intermediate lifters. Doing the above wave increases your injury risk and could bring on a plateau—both counterproductive. We have students who have plateaued from too much volume from which they cannot recover. SFG Joey Yang (who also has a great article on how he tamed the Beast), shared with me that many seasoned SFGs run into trouble with higher training loads—doing many high-rung ladders with 36kg kettlebells—and end up injuring themselves. The key is knowing how much is just enough—for you.

Higher Performance students practicing the kettlebell press in a kettlebell workshop

Why is it so difficult for an advanced lifter to complete a full five-rung ladder compared to an intermediate lifter? The difference is in the kettlebell weight each can handle and the ladder’s cumulative load.

Intermediate: 5 x (1,2,3,4,5) @ 24kg = 1,800kg per hand
Advanced: 5 x (1,2,3,4,5) @ 40kg = 3,000kg per hand

This advanced volume is huge.

Being obsessed with the finer points of programming, I’ve had the privilege and honor to study a multitude of programs from beast conquerors who selflessly shared their programs. I also purchased a Plan Strong™ program to study the theories, and reasoning behind it. (My next goal is to attend a Plan Strong™ workshop which will further my understanding of what separates great plans from the merely good.)

Looking at all the plans, I noticed that for someone nearly at or slightly above their half-bodyweight press—assuming he or she is below 180lbs (~82kg) bodyweight and can successfully press a 40 or 44kg—their average load for the highest volume session ranged between 1,100 and 1,500kg per hand.

One way to counter the demands of such high-volume programming is to reduce the rungs—rather than do ladders of 1,2,3,4,5 reps, switch to ladders of 1,3 reps for example. The volume per ladder goes from 15 reps per hand to 4. Why reduce the number of rungs and total volume? Because advanced lifters have a higher minimal effective volume that ensures continued progress compared to a person with a lower training age (intermediate).

Let’s compare the initial week of a first accumulation phase:

Intermediate: 5 x (1,2,3) @ 24kg = 720kg per hand
Advanced: 5 x (1,3) @ 40kg = 800kg per hand

The advanced lifter’s total volume is already higher than that of the intermediate athlete. Although it required ten fewer repetitions, the minimal effective dose was higher and achieved by the sheer load.

Progress chart showing the differences between intermediate and advanced lifters total training volume — Click on the image to enlarge.

From the above example, even on the week of the highest accumulated volume, the advanced student’s total volume is less than that of an intermediate trainee.

Accumulation: Pressing A Lot

Now, here is my accumulation training protocol:

Exercise: One-Arm Press
Intensity: 4RM-5RM = 36kg

Head Coach Myren Fu's accumulation training protocol for Kettlebell One-Arm Press — Click on the image to enlarge.

Once completed, I set a new 4-5RM of 38kg. I gained 4.4lbs of lean mass in the process, taking me to 169lbs (~76.7kg).

I rinsed and repeated this program for one more cycle. After the 10-week process, I could press the 44kg cold.

Intensification: Getting Ready to Peak

After 10 weeks of volume accumulation, I was ready to intensify. To kill two birds with one stone—continue my strength gains without compromising the muscle mass gained—I adapted my routine from one of the greatest pressers of all time, Doug Hepburn. The six-week cycle brought my press up from a 44kg to 48kg. I put on another 4.4lbs and was now at 174lbs (~79kg).

My primary exercise remained the one-arm military press to practice the groove at high intensity. My secondary exercise was anything with an axial force vector. Since the military press is already an axial force vector exercise, I had to choose a similar pathway: the incline bench press for two days per week and the barbell press once a week.

This was my intensification routine:

Primary (One-Arm Press): 3RM
Secondary (Incline Bench Press x2; Barbell Military Press x1): 5RM

Head Coach Myren's Intensification Routine for Kettlebell One-Arm Press — Click on the image t enlarge.

Rinse and repeat for one more cycle—adding 2kg to my primary press and 5kg to my secondary exercise.

You may have noticed my program featured important StrongFirst principles: continuity of the training process, load waviness, and specialized variety.

I tested on week 7. Voila! 48kg unlocked.

Myren Fu achieving the 48kg One-Arm Kettlebell Press (aka The Beast)

My total weekly volume on the highest week amounted to 2,950kg. Many of the beast tamers programs I studied pressed between 3,000kg and 3,600kg. Although my volume was much lower, it worked for me. Higher volume programs made me constantly ill—quite possibly due to me exceeding my maximum recoverable volume.

It’s critical for you to understand what works for you—and what doesn’t. Do not blindly follow any plan. Pay close attention to your recovery. If you see a performance decrease after three sessions of trying, back off. You most probably exceeded your maximum recoverable volume.

Seven Lessons Learned from my Beast Pressing Journey

Intermediate athletes have a higher recovery rate and can take in more volume than advanced trainees.
Accumulation is important to build connective tissues, increase strength potential, and allows for more practice to happen sub-maximally.
For accumulation phases, one sign to stop is when you cannot continue with your benchmark weights.
For intensification phases, one sign to discontinue is when your lifts’ intensity stops inching up.
It is fine to train for maximal strength and hypertrophy, or at least the maintenance of it, as long as the variance does not exceed 12%.
To lift heavy, spend most of your training time in 75-85% of your 1RM region. But it is imperative to peak—what you train in the 90% and above is different from anything below.
Do not let your past define who you are. If you are bad at something, let it haunt you every day so you can attack it relentlessly.

To find out more about programming and how to maximize your press, I highly suggest you attend a StrongFirst SFG Level I Certification if you have not already. For those who have, Plan Strong takes a deep programming dive that gives you the ability to design your own Russian-like strength plans for whatever your goals. Click here for Plan Strong events.